 |
 |
To order from this page just make your
selections and click on the "Add to Cart" button
or the "Buy" link. If you run into
difficulties please make use of our toll-free
line and give us a call. Our phone numbers, fax
and email addresses are posted at the
bottom of this page.
Upon placing your order you'll receive an
immediate confirmation via email. You are not billed at that time. We process
orders manually, preferring to have a human
actually check things over and contact you
should there be questions. Within 24
hours of placing your order you will receive a
follow-up email confirmation and final invoice reflecting your total charges
(Monday-Friday). You are not billed until we actually send you your final invoice.
Orders shipped to CA addresses will have California Sales Taxes applied, out
of state orders are tax free. Orders over $100 are shipped
FREE!* Orders less than $100 are billed for shipping. During the
ordering process you can select expedited
shipping if required.
(Within the USA we ship via UPS ground. International,
and oversize/weight items will be billed for
shipping and you will be sent an emailed invoice reflecting total charges
prior to actual billing. We will not ship
without you having had a chance to review the
invoice).
CharkBait
Rods
Please note, we have
three pages of Custom CharkBait rods. You've reached our Calstar and
Seeker Special Application and Custom Boat Rod page.
The first group of
rods featured on this page utilize blanks by Seeker and Calstar.
These spefic blanks have gained widespread fame based upon long
range fishing success. They are not rods for everyone, but for those
targeting Cow size tuna or tossing wahoo bombs, these are some
wonderful pieces to own.
Rounding out the
offerings on this page are our own Custom Boat Rods, designed for
West Coast style fishing, with actions well proven for the needs of
anglers targeting bass, baraccuda, yellowtail and tuna. There's
great value with these USA produced rods, hard to imagine with a
truly custom built rod.
Seeker and Calstar
Specialty Custom Rods & Custom Boat Rods
- click here to visit our United Composite Custom Rods
- click here to visit our Mini Tuna Sticks
Seeker and Calstar
Custom Sticks
In the world of long range
fishing Seeker established a rather unique new tool for folks
targeting tuna, larger grade cow size tuna, their 2 x 4. The
concept behind this rod was to build a rod capable of casting a
bait further to lure a fish that might be out of range using more
traditional means. The rod had a relatively light tip, but
followed that up with serious strength in the butt section.
Calstar echoed that design, and expanded upon it very successfully
with a lighter range of offerings and lighter weight.
For our custom versions of
these new factory rods, we also had a concept to fulfill. The cow
rods ultimately wind up on the rail of the big long range boats.
That's part of their design. But, the Seeker and Calstar do not
build them with that in mind. Our cow rods feature a rail pad, so
you won't beat up your rod when you try to leverage a big tuna at
the rail. Further, we felt we could build the Seeker with a better
guide set, and add a roller tip. The Fuji guides we use feature a
rolled lip, securing the spectra safe insert, verses a stamped
guide with glued on spectra insert. Ours is arguably better. The
roller tip we use is a Winthrup, a big meaty tip top with enough
room to fit a pencil through the thing. So, there's no issue with
line and knot diameter and better dissipation of heat and less
friction. We make excellent use of some great blanks with our
custom designed rods, built right and better than the original. We
also make the Rail Rods with AFTCO ring/roller tiptops. These are
a bit lighter in weight than the larger Winthrups, have plenty of
clearance for casting, and represent another option on the custom
rods that go beyond the factory's offering.
Another rod in this series
we're quite proud to have in the line is Calstar's 875 wahoo
specialty rod. Again, it's better built, though Calstar does
indeed build a great rod, we found a few things to improve upon
the design and of course ours are prettier and arguably better
built!
New models
added, 03/2011 : Seeker added both
lighter and heavier versions of their well proven 2x4 to their
lineup. The new 1x3 is a Great 80# rod, the new 3x5 is a 130# and
up brute for those guys needing even more power than the original
2x4. Like our treatment of the 2x4, our custom built versions of
these rods feature a rail pad and use of Fuji's best rolled insert
guide for reliable use of Spectra and enough clearance for any
wind-on made. Further, we've added two favorite long range rods to
our mix, the 6470 and 6470H. These rods are using the same Fuji
guides but do not include the rail piece since that's not the
typical application of these rods. 6470 series rods are most
commonly used for wahoo and for casting to schoolie tuna. Like the
2x4 concept, they are built for both power and casting.
Please note, our custom
series Seeker rods are a considerable step up from the factory
rods. Our guide selection and components are better (in my
estimation), and we offer some features that the factory does not
offer such as a rail pad for the X series rods.
 |
 |
 |
Pictured above, Seeker 1x3 and
6470. |
View Your Shopping Cart
CharkBait
Custom Boat Rods
| Custom rods do not have to be
expensive, we have a high value custom built series of rods
available in the most used line classes for nearshore and offshore
duty. All are triple wrapped with Spectra safe guides using
Rainshadow composite blanks. There are four rods in the series. a
196, 270, 870 and 670 for use with lines of 12# through 50#
applications. We initially had these rods made to match our Newell
Blue and Pink reels, but folks have requested the rods for use with
other reels as well. So, we're offering them as an independent item,
too.  |
 |
View
Your Shopping Cart
CharkBait
Rod Socks
Our Chark-Sleeves are
a bit different than the one's above. They are
available in three sizes. The base of the
sleeve folds up onto the butt section of the
rod and then can be tied off. So, one size can
fit shorter rods with no problem. They are
made of 89% polyester and 11% lycra (like OJ's
gloves if you remember...). The material is
versatile, durable and quick drying. It's
super stretchy, and the micro polyester fabric
wicks away moisture - like those $60 golf
shirts. Nice product, nice price! These will
stretch up to one foot longer in length. So, a
5' will indeed fit a 6' rod, the 7 will
stretch to a tight 8.
|
| |
|
